Toyota 2011 Avalon Quick Reference Manual page 463

4-3. Do-it-yourself maintenance
n After a fuse is replaced
If the lights do not turn on even after the fuse has been replaced, a bulb
l
may need replacement. (→P. 443)
If the replaced fuse blows again, have the vehicle inspected by your
l
Toyota dealer.
If there is an overload in the circuits
n
The fuses are designed to blow, protecting the wiring harness from damage.
CAUTION
n To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failing to do so may cause damage, and possibly a fire or injury.
Never use a fuse of a higher amperage rating than indicated, or use any
l
other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
l
Never replace a fuse with a wire, even as a temporary fix.
This can cause extensive damage or even fire.
Do not modify fuses or the fuse box.
l
NOTICE
n Before replacing fuses
Have the cause of electrical overload determined and repaired by your
Toyota dealer.
440
AVALON_U (OM41428U)
I n f o r ma t i o n P r o v i d e d b y :