Toyota 2011 Avalon Quick Reference Manual page 388

3-7. Other interior features
Programming an entry gate (for U.S.A. owners)/Programming
n
all devices in the Canadian market
Place your transmitter 1 to 3 in. (25 to 75 mm) away from the
surface of the HomeLink
Keep the indicator light on the HomeLink
ming.
Press and hold the selected HomeLink
Repeatedly press and release (cycle) the device's remote
control button for two seconds each until step 4 is completed.
When the indicator light on the HomeLink
ceiver starts to flash rapidly, release the buttons.
Test the operation of the HomeLink
programmed button. Check to see if the gate/device operates
correctly.
Repeat the steps above to program another device for each of
the remaining HomeLink
Programming other devices
n
To program other devices such as home security systems, home
door locks or lighting, contact your authorized Toyota dealer for
assistance.
Reprogramming a button
n
The individual HomeLink
reprogrammed. To reprogram a button, follow the "Basic program-
ming" instructions.
364
AVALON_U (OM41428U)
®
.
®
in view while program-
®
button.
®
by pressing the newly
®
buttons.
®
buttons cannot be erased but can be
I n f o r ma t i o n P r o v i d e d b y :
®
compatible trans-