Automatic Mode - Skoda Roomster Owner's Manual

86 Heating and air conditioning system
Buttons / control dial
A
Setting the blower speed
1
The displays
A
Set blower speed
2
A
The outside temperature
3
A
Connect diagnostic equipment
4
A
Air flow to the windows
5
A
Recirculated air mode
6
A
Air flow to the head, upper body and feet
7
A
Display of selected interior temperature, here: +20 °C
8
A

Automatic mode

9
A
ECON mode
10
Buttons / control dial
A
Setting the interior temperature
11
A
Air flow to the windows
12
A
Automatic mode
14
A
Air flow in the footwell
15
A
Air flow to the upper body
16
A
Air flow to head
17
A
Button for switching off cooling system
18
A
Recirculated air mode
19
Note
A
The interior temperature sensor
not glue or cover over the sensor, otherwise it could have an unfavourable effect on
the Climatronic.
is located in the bottom part of the device. Do
13
Automatic mode
The automatic mode is used in order to maintain a constant temper-
ature and to keep the windows in the interior of the car dry.
Switching automatic mode on
– Set a temperature between +18 °C and +29 °C.
– Move the air outlet vents 3 and 4
is directed slightly upwards.
– Press the button , AUTO appears in the display.
AUTO
The automatic mode is switched off by pressing the button for the air distribution
or increasing or decreasing the blower speed. The temperature is nevertheless
regulated.
ECON mode
The cooling system is switched off in the ECON mode - heating and
ventilation are regulated automatically.
Switching ECON mode on
, ECON appears in the display.
– Press the button
ECON
– Set a temperature between +18 °C and +29 °C.
Recirculated air mode in ECON mode
, AUTO appears in the display.
– Press the button

– Press the button , ECON appears in the display.
ECON
ECON mode operates only within the control temperature range from +18 °C up to
+29 °C.
The ECON mode is switched off when pressing button
Please note that, in the ECON mode, the interior temperature cannot be lower than
the outside temperature. The interior is not cooled and the air is not dehumidified.
⇒ page 88, fig. 98
so that the air flow
or .
 