Superior DRT2033xxx *DRC2033 Installation And Operation Instructions Manual page 56

Innovative Hearth Products
Superior™ DRT2000 and DRC2000 Direct-Vent Gas Fireplaces
Installing the DRT2040 and DRT2045 logs
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE: Do not cover the burner ports.
Table 38: DRT2040 Log Set
1. If necessary, remove the glass door (Page 57).
2. Locate the log placement brackets (not all are shown) (Figure 54).
Figure 54: Placing log 1
3. Position rear log (1) on the left rear log bracket (Figure 55)
4. Position the left front log (2) and the right front log (3) against the log rack (Figure 55).
5. Position the right cross log (4) over the right front log (3) (Figure 56).
Figure 56: Placing log 4
6. Position the left cross log (5) on the left rear log bracket and over left front log (2) (Figure 57).
56
4
5 1
3
2
Left Rear Log Bracket
Volcanic Stone
Glowing Embers
(Do not place glowing embers over burner slots)
1
2
NOTE: Fireplace is shown with optional brick panels.
Log Number
1
2
3
4
5
Catalog number for the entire set:
DRT2040: F1830
DRT2045: F1884
Figure 55: Placing logs 2 and 3
Figure 57: Placing log 5
4
Description
Rear Log
Left Front Log
Right Front Log
Right Cross Log
Left Cross Log
1
2
5
Operation
900004-00, 04/2015
3
3