Superior DRT2033xxx *DRC2033 Installation And Operation Instructions Manual page 55

Innovative Hearth Products
Superior™ DRT2000 and DRC2000 Direct-Vent Gas Fireplaces
Installing the DRT2033 and DRT2035
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log
placement is critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the
flames. Follow the log placement instructions precisely.
NOTE: Do not cover the burner ports.
NOTE: Ensure the left front log (1) and right front log (2) are correctly installed on the burner positioning pins.
Table 37: DRT2033 and 35 Log Sets
1. If necessary, remove the glass door (Page 54) Locate and bend up Burner Locating Tabs (Figure 50).
2. Locate the log placement brackets (Figure 50). Place embers and other media (see Page 52)
Figure 50: Locating the log placement brackets
Left Log Bracket (front & rear)
3. Align the notches in the bottom of the rear log (1) with the left rear brackets (Figure 51).
4. Position the left rear log (1) on the left rear bracket and the left front log (2) on the left front log bracket and the
left burner locating tab (Figure 51).
Figure 52: Placing log 3
5. Position the right front log (3) on the right front log bracket and right burner locating tab (Figure 52).
6. Position the left cross log (4) on the left rear log (1) and right cross log (5) on the right rear log bracket
(Figure 53).
1
4 5
2
3
Right Log Bracket (front & rear)
Left and Right Burner Locating Tabs
Log Number
1
2
3
4
5
Catalog number for the entire set: H7666 - 35" Aries and F1885 33" Aries
Figure 51: Placing logs 1 and 2
2
Figure 53: Placing logs 4 and 5
3
900004-00, 04/2015
Description
Rear Log
Left Front Log
Right Front Log
Left Cross Log
Right Cross Log
1
4
5
Operation
55