Durabrand CD-2086 Operating Instructions Manual page 13

MP3 PROGRAMMED PLAY
The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 20 tracks can be programmed).
Program Number
Album Number
(title number)
Track Number
(song number)
During programming, the symbol "PROG" shows in the display. To program play in your
preferred order, follow steps below:
1. Slide the FUNCTION switch to the CD/
MP3 position. Make sure the set is in
STOP mode (the total album number and
track number show in the display).
2. Press the PROGRAM/EQ button, the
symbol "PROG" will show in the display
and the album number "
PROG
3. Press the SKIP/SEARCH (
buttons to select the title number 3
(example).
PROG
4. Press the PROGRAM/EQ button to
confirm. Title 3 is now selected, and
the display will show:
PROG
NO TE:
1. Programming can only be done in STOP mode.
2. The programmed memory will be lost if the STOP button is pressed twice, or the
alkaline batteries are exhausted or removed, or AC power is shut off, or the CD
DOOR is opened.
3. The player will stop automatically after all programmed tracks have been played.
To change the current program
Just create a new program following the programming procedure.
To cancel programmed play
Press the STOP button twice, the symbol PROG will disappear from the display.
IB-CD2086-WM-E-012005(WMA).pmd
Programming Example
2 3
1
3 6 10
3 5
8
5. Press the SKIP/SEARCH (
or +10 button to s elec t the trac k
number (example 1).
" will flash.
6. Press the PRO GRAM/EQ button to
confirm. Track 1 is now programmed.
The program number 2 will show in
th e di s pla y, r ead y fo r th e ne x t
or )
selection of track.
7. Repeat above steps 3 to 6, you can
program up to 20 tracks.
8. After programming is finished, press the
PLAY button to begin programmed play.
12
13
4 6
5 7
2
4 1 7
2
1 1
4
PROG
PROG
IB-CD2086(AD)-WM-E-031705
3/22/2005, 5:52 PM
etc.
8
etc.
5
etc.
1
or )