FULLY PROGRAMMABLE CD PLAYER WITH REPEAT • RECEIVES AM/FM STEREO BROADCASTS • RECORDS FROM CD, RADIO, OR BUILT-IN MICROPHONE • 2 WAY POWER - AC/DC • USES 6 SIZE “D” BATTERIES PLEASE READ CAREFULLY BEFORE USE IB-CD2036(SY)-WM-E-010805.PMD MODEL CD-2036 (not included) IB-CD2036(SY)-WM-E-010805 2/23/2005, 2:38 PM...
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Page 3
IMPORTANT SAFETY INSTRUCTIONS 15. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.
BATTERY SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR SET, READ AND FOLLOW THESE INSTRUCTIONS. 1. Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries). 2.
But the rad io m ay continue to play on these weak batteries because it uses less power than the CD player. IB-CD2036(SY)-WM-E-010805.PMD To a wall outlet NOTE: One blade of plug and outlet is wider.
PLAYING A CD FUN C TIO N sw itch (at the left side of the set) Connect the supplied AC power cord or batteries (refer to page 4). FUNCTION TAPE/OFF RADIO PLAY PAUSE TIP: “ ” will show in the display if there is no CD disc in the CD compartment or the CD disc was inserted upside down.
Page 7
REP EAT POWER PROG. FM ST. PLAY/ PAUSE • Wh en C D p lay is pau s ed, the PLAY/ PAUSE lamp will flash and no music will play. • To resume play, press PLAY/PAUSE but ton agai n, t he PLAY/PAUSE lamp will s to p...
PLAYING CD TRACKS REPEATEDLY (REPEAT PLAY) You can play CD tracks over and over in normal or programmed play mode (refer to page 8). FUN C TIO N sw itch SKIP/SEARCH buttons 1. Slide the FUNCTION switch to CD position, the POWER lamp will be steadily on. 2.
Page 9
PLAYING CD TRACKS IN PROGRAMMED ORDER You can make a program of up to 20 tracks in the order you want them to be played. STOP button PROGRAM button 1. Slide the FUNCTION s witc h to CD position. Make sure the CD is stopped. 2.
LISTENING TO THE RADIO FUNCTION switch FM ST. lamp (FM STEREO) Connect the supplied AC power cord or batteries (refer to page 4). FUNCTION TAPE/OFF RADIO BAND FM ST TUNING POWER FM ST. FUNCTION TAPE/OFF RADIO IB-CD2036(SY)-WM-E-010805.PMD Slide the FUNCTION switch to RADIO position, the PO WER lamp will turn on.
Page 11
• If the FM broadcas t is nois y, s lide the BAND switch from FM Stereo to FM. • Nex t time y ou want to listen to the radio, just s li de t he F UNCT IO N s w itc h RAD IO pos itio n.
PLAYING A TAPE STOP/EJECT button FUNCTION switch (at the left side of the set) Connect the supplied AC power cord or batteries (refer to page 4). FUNCTION TAPE/OFF RADIO STOP/EJECT PLAY AUTO STOP IB-CD2036(SY)-WM-E-010805.PMD Slide the FUNCTIO N s witc h to TAPE/OFF position.
Selec t the program source (AM, FM, CD, or built-in microphone) you want to record. To record from the CD player. Slide the FUNCTION switch to CD position, and insert a CD, then follow the CD playing steps to play.
Page 14
USE THESE BUTTONS FOR ADDITIONAL OPERATIONS PAUSE button FUNCTION switch (at the left side of the set) VOLUME control P HO NE S JA C K Connect the supplied AC power cord or batteries (refer to page 4). Adjust the volume Stop playback or recording Fast forward or rewind the tape Pause playback or recording...
PRECAUTIONS On Safety • As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only. • Should any solid object or liquid fall into...
Notes on Cassettes • Break off the cassette tab from side A or B to prevent accidental recording. Side A Tab for side A Tab for side B • To record on a tape with its tab broken off, cover the respective tab hole for side A or B with adhesive tape.
TROUBLE SHOOTING Problem The power is not on. There is no sound. “ ” appears in the display even when a CD is in place. CD does not play. The sound drops out. CD does not play while radio may continue to play.
During the initial 90 day period after original purchase, we will service or exchange, at no charge, the set that is returned to LENOXX ELECTRONICS CORP. After the initial 90 day period expires, and for a period of 12 months from original purchase, we will repair the unit covering any part(s) that need to be replaced at no charge, but will charge for the cost of labor, return postage paid by Lenoxx.