SC825 Chassis Manual
D-10 SCSI (Super) GEM Installation on Windows
Operating System
Please refer to the following instructions to install the SCSI GEM driver for the
Windows operating system.
(*Note: This driver is not necessary for other operating systems. If you have two
SCA backplanes, you will need to install the driver twice.)
The driver is located on the Supermicro motherboard driver CD, or is available for
download from our FTP site:
Follow the procedure below to install this driver onto your system.
Method One: Installing the Driver
1.
Right click on
2.
Select the
Hardware tab and click on Device Manager.
3.
Open
Other Devices or where GEM318 is visible.
4.
Right click on this device and select
5.
Click the
Driver tab and select Update Driver.
6.
Click
Next twice, uncheck both the Floppy Disk Drives option and the CD-
ROM Drives option, then select Specify a Location and select Next.
7.
Click
Browse and select the D drive or where Supermicro Setup CD is vis-
ible.
8.
Select the
Qlogic folder and click Open.
9.
System will automatically detect GEM318 and install the driver.
The following optional installation method may also be used to install the
driver,
ftp://ftp.supermicro.com/driver/Qlogic/
My Computer and choose Properties.
D-10
Properties.