Removing The Chassis Cover - Supero SC825TQ-R720LPB User Manual

SC825 Chassis Manual
5-3

Removing the Chassis Cover

2
Removing the Chassis Cover
1. Remove the two screws on each side of the cover, which secure the cover to
the chassis.
2. Press the release tabs to remove the cover from the locked position. Press
both tabs at the same time.
3. Once the top cover is released from the locked position, slide the cover
toward the rear of the chassis.
4. Lift the cover off the chassis.
Warning: Except for short periods of time, do NOT operate the
!
server without the cover in place. The chassis cover must be in
place to allow proper airflow and prevent overheating.
1
1
Remove
Screw
2
Release
Tab
Figure 5-1: Removing the Chassis Cover
4
3
5-2
1
1
Remove
Screw