Rack Mounting Instructions; Separating The Sections Of The Rack Rails - Supero SC825TQ-R720LPB User Manual

SC825 Chassis Manual
6-4

Rack Mounting Instructions

This section provides information on installing the SC825 chassis into a rack unit
with the quick-release rails provided. There are a variety of rack units on the market,
which may mean the assembly procedure will differ slightly. You should also refer to
the installation instructions that came with the rack unit you are using.
NOTE: This rail will fit a rack between 26" and 33.5" deep.

Separating the Sections of the Rack Rails

The chassis package includes two rail assemblies in the rack mounting kit. Each
assembly consists of two sections: an inner fixed chassis rail that secures directly
to the server chassis and an outer fixed rack rail that secures directly to the rack
itself.
Rail Assembly
1
1
Extending the Rails
1
2
1
3
1
4
Quick-
Release Tab
Separating
the Inner Rail
Extension
Figure 6-1: Separating the Rack Rails
6-4
Separating the Inner and Outer Rails
1. Locate the rail assembly in the chassis
packaging.
2. Extend the rail assembly by pulling it
outward.
2
3. Press the quick-release tab.
4. Separate the inner rail extension from
the outer rail assembly.
F.
SCREW
1
SCREW
screw the handles the
outer rails for secure
purpose if necessary