SA-HT720P / SA-HT720PC
Step 3 Release the 2 claws in the direction of arrow (1), and
then push the pulley pin in the direction of arrow (2).
11.11. Removal of the Loading Motor
P.C.B.
· Follow the (Step 1) - (Step 2) of Item 11.1.
· Follow the (Step 1) - (Step 4) of Item 11.2.
· Follow the (Step 1) - (Step 5) of Item 11.3.
Step 1 Remove 2 screws.
Step 2 Remove Loading Motor P.C.B.
11.12. Removal of the Drive Gear (A)
& (B)
· Follow the (Step 1) - (Step 2) of Item 11.1.
· Follow the (Step 1) - (Step 4) of Item 11.2.
· Follow the (Step 1) - (Step 5) of Item 11.3.
Step 1 Release the claw in the direction of arrow (1), and then
push drive gear shaft up.
Step 2 Remove Drive Gear (A) and Drive Gear (B).
11.13. Disassembling the Fixed Plate,
Magnet and Clamper
· Follow the (Step 1) - (Step 2) of Item 11.1
· Follow the (Step 1) - (Step 4) of Item 11.2.
· Follow the (Step 1) - (Step 5) of Item 11.3.
Step 1 Release 3 claws in the direction of arrow.
18