Kidde RemoteLync User Manual page 9

What to expect
RemoteLync App should be on your mobile device
You should connect to the Kidde... monitor through Wi-FI.
The monitor will report back what routers are with in range for
you to select and provide passcode to inorder for monitor to
connect.
Once monitor is connected to your router, you will add it to your
account. Besure you are connected to the same Wi-Fi router as
the monitor for enrollment to work.
With the monitor in setup mode you will test the smoke and/or
CO alarms furthest from the monitor so it can judge the volume
it will hear alarms at. This helps reduce false detections from
your neighbours house or appartment.
App will show testing progress. It will indicate if self-test
completed successfully and whether or not it detected an alarm
pattern from your alarms if they were tested.
When an alarm pattern is detected, monitor will send out
notifications to you and your contacts you have added for this
monitor.
Follow the same processes as above for connecting to wireless
router, enrolling into account and learning alarm furthest from
monitor.
App will walk you through the process to re-establish detection
of your alarms.
You will go through the same process of "connecting to wireless
router" as was done at setup.
Go into monitor menu and remove monitor from account if you
no longer have the monitor.
9