Maintenance Information - Kidde RemoteLync User Manual

Weekly testing is recommended. If at any time the monitor does not
perform as described, please verify that it is correctly inserted into the
wall outlet, and is connected to your home network. If the monitor still
does not appear to be operating properly, call Product Support as shown
at the end of the user guide.
Reset Function
The reset function can be used to return the monitor to its factory
settings and re-start the setup and enrollment processes. Using a small
pin or paper clip, press and hold the reset button on the side of the
monitor for 5 seconds (until LEDs start flashing). Then unplug and re-
insert the monitor into the power outlet to re-start the setup process.

Maintenance Information

To keep your RemoteLync Monitor in good working order, please
follow these simple steps:
• Verify the operation of the monitor's voices and LED lights
by conducting a test once a week.
• Once a month, clean the monitor by using a soft brush at-
tachment, vacuum the front vents to remove dust and dirt.
After cleaning conduct a test to verify operation.
• Never use detergents or other solvents to clean the unit.
• Avoid spraying air fresheners, hair spray, or other aerosols
near the monitor.
Do not paint the monitor. Paint will seal the vents and interfere
with the sensor's ability to detect alarm signals. Never attempt
to disassemble the unit or clean inside. This action will void
your warranty.
CAUTION: YOUR ACOUSTIC MONITOR IS SEALED AND THE
!
COVER IS NOT REMOVABLE!
Reset Button Access
11 10