Switching Between And Exiting Applications - LG G2 User Manual

Getting Started
n
NOTE
The battery must be fully charged initially
to improve battery lifetime.
n
NOTE
Your phone has an internal antenna. Be
careful not to scratch or damage this
rear area, as that will cause loss of
performance.
When the battery becomes fully discharged
and you connect the phone to a charger,
the Notifi cation LED lights will blink.
This is normal operation for a completely
discharged battery to prevent overfl owing
current because the phone is designed
to provide reasonable protection against
damage to the battery. Once the battery has
enough charge, the screen will turn on and
display a battery image.
n
Warning
For your safety, do not remove the battery
incorporated in the product.
n
Warning
Use only LG-approved chargers, batteries
and cables. When using unapproved
chargers or cables, it may cause battery
slow charging the message regarding
16
charging delay. Or, unapproved chargers or
cables can cause the battery to explode or
damage the device, which are not covered
by the warranty.
n
Warning
It may be interrupted charging when you
use a USB hub which is not retained rated
voltage.
Switching between and
exiting applications
Multi-tasking is easy with Android because
open applications keep running even when you
open another application. There is no need to
quit an application before opening another. Use
and switch among several open applications.
Android manages each application, stopping
and starting them as needed, to ensure that
idle applications don't consume resources
unnecessarily.
Switching between applications
- Press and hold the Home Key
recently used applications will be displayed.
Then tap the application you want to access.
- To remove an application from the list, swipe
the app preview to the left or right.
. A list of