Via Bluetooth - LG G2 User Manual

To visible my phone from other devices.
1 From the Home screen, tap the Menu
Key > All settings > Networks
tab > Bluetooth.
2 Make sure Bluetooth is turned on.
3 Tap the checkbox. Being visible for 2
minutes is set by default.
n
NOTE
To change the visibility time length, tap
the Menu Key
Choose from 2 minutes, 5 minutes, 1
hour, or Never time out.
To scan other Bluetooth devices.
1 Bluetooth is on.
2 Tap Search for devices.
n
NOTE
To fine the other devices, make it
discoverable mode.
Pairing Bluetooth devices
1 Bluetooth is on.
2 Tap Search for devices. Your device
will display a list of discovered in-range
Bluetooth devices.
3 Tap the device you want to pair from
the list.
> Visibility timeout.
4 Tap pair or Enter the passkey if needed,
and tap OK.
n
NOTE
Pairing between two Bluetooth devices
is a one-time process. Once a pairing has
been created, the devices will continue to
recognize their partnership and exchange
information.
n
TIP
Please consult documentation included
with Bluetooth device for information on
pairing mode and passcode (typically 0 0 0
0 – four zeroes).
How to send data from your phone

via Bluetooth

You can send data via Bluetooth by
running a corresponding application, not
from Bluetooth menu.
* Sending pictures: Open the Gallery
application and tap a picture. Then tap
> Bluetooth. Check the devices if
Bluetooth is turned on. Then tap the
device you want to send data to from
the list.
* Sending contacts: Open the Contacts
application. Tap the contact you want
to share, then tap the Menu Key
Settings
>
79