Switching Between And Exiting Applications - LG LGD800.AATTBK User Manual

Getting Started
NOTE
X
The battery must be fully charged
initially to improve battery lifetime.
X
Your phone has an internal antenna. Be
careful not to scratch or damage this
rear area, as that will cause loss of
performance.
X
When the battery becomes fully
discharged and you connect the phone
to a charger, the Notification LED lights
will blink. This is normal operation for
a completely discharged battery to
prevent overflowing current because the
phone is designed to provide reasonable
protection against damage to the
battery. Once the battery has enough
charge, the screen will turn on and
display a battery image.
Warning
X
Use only LG-approved chargers, batteries
and cables. When using unapproved
chargers or cables, it may cause slow
charging. Or, unapproved chargers or cables
can cause the battery to explode or damage
the device, which are not covered by the
warranty.
16
X
Charging may be interrupted when you
use a USB hub, which is not retained
rated voltage.
NOTE
X
Non-Removable Battery
Your phone has an internal, rechargeable
battery that should be replaced only by
LG or an authorized LG repair center. You
should never try to open or take apart
this phone yourself. Opening the phone
can cause damage that will void your
warranty.
Switching between and
exiting applications
Multi-tasking is easy with Android because
open applications keep running even when you
open another application. There is no need to
quit an application before opening another. Use
and switch among several open applications.
Android manages each application, stopping
and starting them as needed, to ensure that
idle applications don't consume resources
unnecessarily.