Table of Contents
Advertisement
4
INSTALLATION INSTRUCTIONS
4.1
Levelling
The word 'level' is somewhat of a misnomer as a 'spirit level' need not be used to set the appliance level. It
is preferable to have the appliance level in appearance where both doors will close with the aid of the door
closing components. It is also important that the appliance sits solidly on the floor.
• Front and rear rollers are fitted ex factory.
• Cabinet levelling can be done by adjustment of the front roller levelling wheel fitted ex factory. See
diagram 4.1B.
• Weight should be lifted off the cabinet for ease of adjustment.
• The product should be levelled with the majority of the weight on the hinge side front foot. The opposite
side front foot should then be adjusted to stabilise the product.
REAR ROLLERS
Diagram 4.1A
FRONT ROLLER/LEVELLING WHEEL
Diagram 4.1B
10
Hide quick links:
Advertisement
Table of Contents
