Cuckoo CRP-HW10 Fuzzy Series Operating Instructions Manual page 33

If there is a problem with your cooker, check the following details before requesting service to your dealer.
Sometimes the cooker may not operate as desired if used incorrectly.
Case
When the button cannot
operate with " "
When the Pressure
"Cook/Turbo" Timer
button does not operate
with " "
When the rice is badly sticky.
When the time cannot be
preset.
When you smell after and
before cooking?
When the top cover cannot
be closed.
When " ", " " are
shown on the LCD by turns.
When " ", " " are
shown on the LCD by turns.
" "mark shows up
during the product operation
" " sign is displayed
during the warming or
" " sign is displayed
during the cooking.
Check points
Is the inner pot inserted?
Check the rated voltage?
Did you turn the Lock/Unlock Handle
to "Lock"
Is "pressure" lamp on?
Is there any rice or any other alien
substance on the temperature sensor or
the bottom surface of the inner pot?
Is the current time correct?
Is AM or PM set properly?
Did you set the reservation time over
13 hours?
Did you clean it after cooking?
Is the inner pot correctly inserted in the main
body?
Is the Lock/Unlock handle on the top cover
set to "Lock"?
Is there hot food in the inner pot?
Micom power is out.
The sensor is broken.
Micom memory is out.
CHECK BEFORE ASKING
FOR SERVICE
Do the following
Please insert inner pot.
This product is 120V only.
Please turn the "Lock/Unlock" handle to "Lock".
Clean all the alien substances on the
temperature sensor or the bottom surface of the
inner pot.
Set the current time. (Refer to page 14)
Check the AM and PM.
Maximum reservation time is 13 hours.
(Refer to page 26~27)
Please clean it after cooking.
Please put in the inner pot perfectly.
Please turn the "Lock/Unlock" handle to "Lock".
Pull the pressure handle to aside once.
Please cut the power and contact customer service.
Please cut the power and contact customer service.
Please cut the power and contact customer service.
This function checks to see if power or product has
abnormality. If the mark shows up continuously,
contact customer service.