Night Voice Volume Reduction; Voice Setting Function; How To Set Voice Function; How To Set Night Voice Volume Reduction - Cuckoo CRP-HW10 Fuzzy Series Operating Instructions Manual

WOMAN AND MAN VOICE SETTING FUNCTION

Night Voice Volume Reduction

Set the function of night voice volume reduction, the function to reduce the volume of voice during
night time(10:00PM-05:59AM) on need-to-do basis. This function works only during night time.

How to set night voice volume reduction

Example) 60% of day time voice volume
1. Press mode button 10 times in standby status, and you will enter Night Voice Volume Reduction mode. When pressing
mode button initially, press the button for 1 second or longer to enter Night Voice Volume Reduction mode.
2. When you enter Night Voice Volume Reduction mode, a voice comes up saying "You have entered Night Voice Volume
Reduction. Select or inactivate Night Voice Volume Reduction mode with 'Menu/Selection' button and press 'Set' button."
3. Press 'Menu/Selection' button, and as process progress bar changes, voice volume will change. Select desired voice
volume, and press 'Set' button.
4. Once process progress bar reach full condition through adjustment of 'Menu/Selection' button, a voice will come saying
"The function of Night Voice Volume Reduction is inactivate." Inactivate the function by pressing 'Set' button.
5. If 'Set' button is pressed or no button is pressed for 7 seconds after you enter Night Voice Volume Reduction mode, the
function will be inactivated along with voice "As set time is elapsed, the function is inactivated", and the system will be
back to standby mode.

Voice Setting Function

This function helps you select Auto voice for either a woman or English or Chinese's voice.
With this function, you can set to your desired voice.

How to set voice function

Example) When set to woman voice
1. Press mode button 11 times in standby status, and you will enter Voice mode. When pressing mode button initially,
press the button for 1 second or longer to enter Voice mode.
2. When you enter Voice mode, a voice comes up saying "You have entered Voice function. Select or inactivate Woman,
English and Chinese Voice mode with 'Menu/Selection' button and press 'Set' button."
3. After setting Auto voice with 'Menu/Selection' button, woman voice or English or Chinese, and press 'Set' button.
4. If 'Set' button is pressed or no button is pressed for 7 seconds after you enter Volume, the function will be inactivated
along with voice "As set time is elapsed, the function is inactivated", and the system will be back to standby mode.
NIGHT VOICE VOLUME REDUCTION /
Night voice volumes by the setting of process progress
Example) When set to English voice
Zero volume
20% of day time voice volume
40% of day time voice volume
60% of day time voice volume
80% of day time voice volume
Example) When set to Chinese voice