Unction Operating Part; Error Code And Possible Cause - Cuckoo CRP-HW10 Fuzzy Series Operating Instructions Manual

Function Operating Part
Preset/AUTO
CLEAN Button
Used to preset preferred
cooking time
(Refer to page 26~27)
When you use automatic
steam cleaning function
(Refer to page 19)
Mode button
This function is used to customize
individual (Refer to page 20~22)
cooking preference,
time-setting(Refer to page 14),
voice volume setting
(Refer to page 14),
keep warm temperature setting
(Refer to page 29), and power
saving mode(Refer to page 31).
Menu / Selection
button
This function is used to select from among glutinous rice, turbo glutinous rice,
mixed rice, turbo mixed rice, sushi rice, GABA rice, baby food, nutritious porridge, chicken soup,
nu rung ji, multi cook, black bean, nutritious rice and to modify preset time. See page 18, 19, 26.
For setting selected action with mode button and setting gaba time multi-cook time. See page 24, 25.
If no operation is done while power cord is plugged, the system while be on standby mode as shown in the figure.
(The menu on standby screen, time, voice and customized rice taste stage may differ depending on user configuration.)
If cancel button is pressed during cook, the rice cooker will go on standby mode.
Press the button until the buzzer sounds. Picture may vary depending on model.

Error Code and Possible Cause

If the product has any problems or is used inappropriately, you can follow the marks below. If error persistently shows up,
in normal using conditions or after taking recommended measures, inquire with customer service.
When the inner pot is not placed into the unit.
Problem on fan motor.
When pressing the Pressure Cook and Timer botton, while the Lock/Unlock handle is on "Unlock"
Turn the Lock/Unlock handle "Lock"
When boiling only water.
When setting preset time longer than 13 hours Set the preset time within 13 hours. (Refer to page 26~27)
It is appears on the display when you press Start button again, or if the cooking has finished and you've never
ever turned the handle to 'Unlock'. It can be solved by turning handle to 'Unlock' and then turn to 'Lock'.
Problem on micom power.
Problem on micom memory.
FUNCTION OPERATING PART /
ERROR CODE AND POSSIBLE CAUSE
Keep Warm /
Reheat button
Used to warm or reheat.
(Refer to page 28~30)
Display
Problem on temperature sensor. ("
marks blink.
This code indicates the function of checking for abnormulity of power or product.
Please contact customer center.
Pressure
Cook/Turbo Button
This function is used to start
cooking. (Refer to page 18)
Cancel button
This function is used to
cancel a selection or release
remaining steam in the inner
pot. (Refer to page 34)
When using Power saving
function. (Refer to page 31)
Set button
This function is used to
select a function or to
button-lock function.
(Refer to page 31)
<Standby condition screen>
"mark, " "mark, " "mark blink. )
Problem on environment sensor.