Table of Contents
Advertisement
Adjusts color tint in NTSC video.
NTSC Tint
This option is only available for
NTSC video sources.
Sets up the NTSC video display
format to match that of the input
NTSC video input from other
NTSC Setup
devices (such as a DVD player).
This option is only available for
NTSC video sources.
Automatically adjusts Frequency,
Phase, H. Position and V. Position
Auto
to place the PC input image on the
screen.
Frequency
Adjusts the display clock frequency.
Adjusts the display clock phase.
Phase
Adjusts the horizontal position of
H. Position
the image.
Adjusts the vertical position of the
V. Position
image.
Adjusting the contrast
1. Set the contrast to the highest level.
2. Gradually decrease the contrast level until you reach the point where the
details in the bright areas of the image can be seen clearly. Do not further
decrease the contrast level to avoid losing the saturation of colors.
Adjusting the brightness
1. Set the brightness to the lowest level.
2. Gradually increase the brightness level until you reach the point where the
details in the dark areas of the image can be seen clearly. Do not further
increase the brightness level to avoid the black areas from looking grayish.
Setting up Personal Picture mode
You can adjust the settings in the Picture menu and save them as your
Personal Picture Mode. You can press
control to select these modes directly.
目錄 (Menu)
1. Press
2. Press
or
menu.
3. Press
Personal
4. Press
and then press
5. Press
目錄 (Menu)
to display the OSD menu on-screen.
to select
Picture
or
to select
Picture Mode
.
or
to select
Contrast
or
to adjust the settings to your satisfaction.
to save the settings and close the OSD menu.
Press
for redder
tones,
for
greener tones.
Press
or
change selection.
Press
OK
to begin the auto
adjustment function.
Press
or
change selection.
影像模式 (Picture Mode)
, and then press
OK
, and then press
,
Brightness
,
Color
On-Screen Display (OSD) menu
0 to 64
• 0 IRE
to
• 7.5 IRE
(Dependent
upon the
to
resolution of
the input
signal)
on the remote
to enter the Picture
or
to select
,
Sharpness
..., etc.,
19
Advertisement
Table of Contents
