Mnp/V.42/V.42Bis/V.44 - Lenovo 3000J 7387 User Manual

MNP/V.42/V.42bis/V.44

80 g
m n
&T6
&T7
&T8
&V &V0
&V1
&W_ &W0
&W1
%E_ %E0
%E1
+MS?
+MS=?
+MS=a,b,c,e,f
n
m n
%C_ %C0
%C1
%C2
%C3
&Q_ &Q0
&Q5
&Q6
+DS44=0, 0
+DS44=3, 0
Perform a Remote Digital Loopback Test
Perform a Remote Digital Loopback Test and
Self-Test
Perform Local Analog Loopback Test and Self-Test
Displays Active and Stored Profiles
Display Last Connection Statistics
Stores the active profile as Profile 0
Stores the active profile as Profile 1
Disable auto-retrain
Enable auto-retrain
Displays the current Select Modulation settings
Displays a list of supported Select Modulation
options
Select modulation where: a=0, 1, 2, 3, 9, 10, 11,
12, 56, 64, 69; b=0-1; c=300-56000; d=300- 56000;
e=0-1; and f=0-1. A, b, c, d, e, f default=12, 1,
300, 56000, 0, 0. Parameter "a" specifies the
modulation protocol desired where: 0=V.21, 1=V.22,
2=V.22bis, 3=V.23, 9=V.32, 10=V.32bis, 11=V.34,
1 2 = V . 9 0 , K 5 6 F l e x , V . 3 4 . . . . . . , 5 6 = K 5 6 F l e x ,
V.90,V.34......, 64=Bell 103, and 69=Bell 212.
Parameter "b" specifies automode operations where:
0=automode disabled, 1= automode enabled with
V.8/V.32 Annex A. Parameter "c" specifies the
minimum connection data rate (300- 56000).
Parameter "d" specifies the maximum connection
rate (300-56000); Parameter "e" specifies the codec
type (0= Law, and 1=A-Law). Parameter "f"
specifies "robbed bit" signaling detection
(0=detection disabled 1=detection enabled)
Disable MNP Class 5 and V.42bis data compression
Enable MNP Class 5 data compression only
Enable V.42bis data compression only
Enable MNP Class 5 and V.42bis data compression
Direct data link only (same as \N1)
V.42 data link with fallback options
Normal data link only (same as \N0)
Disable V.44
Enable V.44
I
I