Lenovo ThinkPad X41 Tablet MT 1866 Hardware Maintenance Manual page 107

Removing and replacing a FRU
When installing: The replacement bezel should have
adhesive pre-applied; therefore, remove
the covering from the bezel to expose
the adhesive, and then place the top
edge under the frame, shown as 1 ,
then push the bezel down and secure
with the latches firmly. Be careful not to
make the bezel touch the Bluetooth
antenna from being deformed downward
or inward as B . Make sure Bluetooth
antenna is not deformed as A .
A
B
103
ThinkPad X41 Tablet