Kenwood KDC-135 Service Manual page 11

• TUNER preset operation
Key
4 Preset function
• K3I forced switching
Every time when [6] key is pressed in tuner FM source, switched in the following order: AUTO → Forced WIDE → Forced MIDDLE → Forced
NARROW → AUTO. Default status is AUTO, and displayed as shown below.
Key
6 K3I Forced switching
• FST adjustment mode
Perform FST soft-mute adjustment.
Key
Enter the FST adjustment mode. (Press for 1 second or longer.)
Operations in the FST adjustment mode are as follows:
Key
FM (UP) Soft-mute adjustment
AM (DOWN)
Adjustment value
memory
Mode clear
After completing the FST adjustment, if You wish to clear the test mode, You can do this using the reset button.
Test mode specifications in CD source
• Procedure in CD-DA media (KTD-02A)
Key
Track up procedure
Track down procedure
1 Jump procedure
2 Jump procedure
3 Information display
Mechanism model name
Mechanism version
6 Jump procedure
Used media: For CD, KTD-02A
TEST MODE
Description of display
9 8
Description of display
A 9 8 . 1
3 9 8 . 1
2 9 8 . 1
1 9 8 . 1
Description of display
S D
W R
9 8
Description of display
6 C 0 0 0 0
KDC-135/135CR/136
Change to 98.3MHz with the preset key [4].
. 3
AUTO (1)
Forced WIDE (2)
Forced MIDDLE (3)
Forced NARROW (4)
Note
18dBµ (0) ↔ 36dBµ (F)
– F
T Displays the data that has been written in the E2PROM when
pressing the key for 2 seconds or longer.
Clear the FST adjustment mode. (Returns to normal display
. 3
and the test mode is retained.)
Every time pressed, jumps to the track shown below.
No.9 → No.15 → No.10 → No.11 → No.12 → No.13 → No.22 →
No.14 → No.9 (recursive)
or less, playback starts with track No.1.
Goes down by 1 track from the currently played track.
Jump to No. 28 (Scratch 0.7mm for MUSIC line vibration testing)
Jump to No. 14 (Blurring surface disc TCD-731RA Tr14)
Display of Mechanism model name and Mechanism version.
0 0
(When key is pressed while the display in the left is being
shown, returns to normal display.)
Jump to No. 15. Set the volume value to "25".
(For 20Hz 0dB DC protection false-operation FCT checking)
Description
Description
Description
Description
But in case the disc has 8 tracks
11