Accessing System Board Components And Drives - Lenovo 8010 User Manual

Accessing system board components and drives

You might need to pivot the drive bay assembly upward and remove the PCI riser
and adapters to access system board components such as memory, the battery, and
to access the drives.
To access system board components and the drives:
1. Open the computer cover. See "Opening the cover" on page 20.
2. Pivot the drive bay assembly upward as illustrated.
3. If any PCI adapters are installed, remove the PCI riser and adapter cards. Do
22
User Guide
Note: Make sure you note the location of any cables that you disconnect from
the drives or the system board.
not remove any adapters from the riser card. See "Installing PCI adapters" on
page 25.