Table of Contents
Advertisement
1.2
Important Warning Symbols
The following symbols may be encountered during installation or troubleshooting.
These warning symbols mean danger. Bodily injury may result if you are not
aware of the safety hazards involved in working with electrical equipment and
radio transmitters. Familiarize yourself with standard safety practices before
continuing.
1.3
Important Service Information
1. Refer all repairs to qualified service personnel. Do not remove the covers or
modify any part of this device, as this will void the warranty.
2. Disconnect the power to this product and return it for service if the following
conditions apply:
a) The terminal does not function after following the operating instructions
outlined in this manual.
b) Liquid has been spilled, a foreign object is inside, or the terminal has been
exposed to rain.
c) The product has been dropped or the housing is damaged.
3. Locate the serial number of the terminal, antenna, and transceiver and record
these on your registration card for future reference. Use the space below to
affix serial number stickers. Also, record the MAC address, located on the
back of the terminal.
1.4
UL Notice
This product is UL registered. Refer to section 1 of the product User Guide for UL
notice information.
1.5
FCC Notice
This product is FCC registered. Refer to section 1 of the product User Guide for FCC
notice information.
1.6
R&TTE Directive 1999/5/EC Statements
Refer to the product User Guide for R&TTE notice information.
Conformance Documents
View product conformance documents at the following web address:
http://www.redlinecommunications.com/conformance/
70-00042-01-02
Electro-Magnetic
Radiation
Proprietary Redline Communications © 2005
Page 6 of 34
Installation Guide
BFW
AN-30e & AN-50e Systems
High Voltage
August 2005
Advertisement
Table of Contents
