Daisy Chain Monitors - LG 55LV75A Owner's Manual

58
MAKING CONNECTIONS

Daisy Chain Monitors

To use different products connected to each other, connect one end of the signal input cable (DP Cable) to
the DP Out connector of Monitor 1 and connect the other end to the DP In connector of the other product.
DP Cable
Use the cable provided with the product or use a DisplayPort certified cable version 1.1a or higher.
NOTE
If the signal is stable and there is no cable loss, in general, up to 100 monitors can be connected via
y
the DP Out port (at the recommended resolution). If you want to connect more than this number of
monitors, it is recommended to use a distributor.
If you set the tile mode using DVI or HDMI, you will not be able to watch HDCP-encrypted content.
y
If the signal cable between the product and your PC is too long, make sure to use the Booster or
y
optical cable.
Monitor 1 Monitor 2 Monitor 3 Monitor 4