Using The Monitor Set; Connecting To A Pc; Rgb Connection - LG 55LV75A Owner's Manual

USING THE MONITOR SET

Connecting to a PC

Your Monitor set supports the Plug & Play* feature.
* Plug & Play: A PC will have a built-in driver for
the monitor, no extra software is needed.
NOTE
It is recommended to use the monitor set
y
with the HDMI connection for the best image
quality.
To comply with the specifications of the
y
product, use a shielded interface cable with
ferrite core, such as a D-sub 15-pin cable
and DVI/HDMI cable.
If you turn the monitor set on when the set
y
becomes cold, the screen may flicker. This is
normal.
Some red, green, or blue spots may appear
y
on the screen. This is normal.
To minimize the impact of electromagnetic
y
waves, secure the cables with cable ties.
CAUTION
y
Do not press the screen with your finger for
y
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the
y
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
Connect the signal
input cable and tighten
it by turning the screws
clockwise.
USING THE MONITOR SET

RGB Connection

Transmits the analog video signal from your PC to
the monitor set. Connect the PC and the Monitor
set with the 15-pin signal cable as shown the
following illustrations.
Select RGB input.
Back of the product.
15-pin D-Sub Signal
Cable (Max 3m)
Macintosh Adapter
(not included)
(not
included)
PC/ MAC
NOTE
Use the standard
y
Macintosh adapter since
an incompatible adapter
is available in the market.
(Different signaling system)
Apple computers may require an adapter to
y
connect to this monitor. Call or visit their web
site for more information.
17
(not included)