Memory/Preset Operation; Mode Memoire/Prereglage; Speicherbetrieb; Funzioni Memory/Preset - Toshiba RAS-07UKP-ES Owner's Manual

MEMORY/PRESET OPERATION

Memorize the frequently used operation setting by the MEMO button
for convenience.
Start the air conditioner in the operation mode which you want the
remote control to memorize.
Press the button as follows while the air conditioner is in operation.
1 MEMO button 1 1
1 1
Press this button briefly to standby memorizing the setting.
All the icons currently displayed except for the clock display and
mark flashes.
2 2
2 MEMO button 2 2
Press and hold the MEMO button for more than 3 seconds while
the display flashes.
The mark is indicated and the setting is memorized.
• If you do not press the MEMO button within 3 seconds or if you
press another button, the MEMORY setting is cancelled.
• Operation modes which can be memorized with the MEMO button
are MODE, Temperature, FAN, TIMER and Hi POWER.
To operate the air conditioner with the setting memorized by the
MEMO button.
1 1 1 1 1 PRESET button
Press the PRESET button. The setting memorized with the MEMO
button will be indicated and the air conditioner operates with
regards to the setting.
•
The OPERATION lamp (green) on the display panel of the indoor
unit goes on, and operation starts after approximately 3 minutes.
•
Initial setting:
MODE
Temperature : 22
: AUTO
1 1
2 2
12
START/STOP
FAN MODE
SWING ECO
TIMER
FIX
ON OFF
FILTER
RESET
1 1
START/STOP
FAN MODE
SWING ECO
TIMER
FIX
ON OFF
FILTER
RESET
PRESET
AUTO
Hi-POWER
MEMO
SET CLR
CLOCK CHECK
PRESET
AUTO
Hi-POWER
MEMO
SET CLR
CLOCK CHECK
EN