Infinity MOUNTAIN BICYCLE Owner's Manual page 30

Assembly
3
Pads
Front
Rear
Reflector
Reflector
(White)
(Red)
3
Chainguard
56
Final Check
Install any additional parts that are supplied with your bike.
NOTE: Your bicycle may be equipped with different style components than
the ones illustrated.
Reflectors: Attach the white reflector to the front bracket and the red
reflector to the rear bracket using a 8mm wrench or a Philips head
screwdriver. Attach the brackets to the bicycle using the hardware
provided. For some models, the front reflector bracket will be mounted on
the front brake assembly bolt that fits through the fork. It is important to
make sure all connections are tightened securely and that the reflectors
are properly angled.
Pads: If your bike is supplied with pads, wrap the foam inner cushion
around the appropriate bar. Place the outer cover over the inner cushion
and press the velcro together securely. Turn the pad so the velcro faces
the ground.
Chainguards: If not already attached, attach the chainguard to the bicycle
frame using the clamps provided. Secure in place making sure the guard
does not bind or get caught on the chain.
Tire Pressure: Check tire pressure, inflate to the range recommended on
the tire sidewalls.
Before riding, ensure all nuts, bolts and fittings on the
bicycle have been correctly tightened.