Panasonic CF-T8 Operating Instructions Manual page 29

Installing the driver
1 Click (Start) and input "c:\util\drivers\amt\MEI\setup.exe" in [Start Search] then
press .
Enter
Follow the on-screen instructions.
2 If [SOL/IDE-R] is set to [Enabled] in the INTEL(R) AMT CONFIGURATION,
click (Start) and input "c:\util\drivers\amt\LMS_SOL\setup.exe" in [Start Search] then
press .
Enter
Follow the on-screen instructions.
Resetting AMT configuration
1 Turn on the computer, and press
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
2 If the Supervisor Password is not set, select the [Security] menu, then set Supervisor
Password.
3 Select the [Security] menu, and select [AMT Configuration], and press
4 Select [Intel(R) AMT] and press
5 Select [Disabled] and press
6 Press .
Esc
7 Select the [Exit] menu, and select [Save Current Values], and press
At the confirmation message, select [Yes] and press Enter.
8 Select the [Security] menu, and select [AMT Configuration], and press
9 Select [Reset AMT Configuration] and press
At the confirmation message, select [Yes] and press Enter.
The computer will restart.
If the password is requested, enter the Supervisor Password.
10 Press when the "Continue with unconfiguration" message will appear.
Y
or while [Panasonic] boot screen is displayed.
F2 Del
.
Enter
.
Enter
Enter
Enter
.
.
Enter
.
.
Enter
29