Intel ® Active Management Technology - Panasonic CF-T8 Operating Instructions Manual

®
Intel Active Management Technology (Intel
<Only for model with Intel
®
Intel AMT offers the operational management function and security function through network.
Setting AMT configuration
1 Turn on the computer, and press
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
2 If the Supervisor Password is not set, select the [Security] menu, then set Supervisor
Password.
3 Select the [Security] menu, and select [AMT Configuration], and press
4 Select [Intel(R) AMT] and press
5 Select [Enabled] and press
6 Select [Intel(R) ME Setup Prompt] and press
7 Select [Enabled] and press
8 Press .
Esc
If you do not use the Supervisor Password, clear the Supervisor Password following steps.
A Select [Set Supervisor Password], and press Enter.
B Enter the Current Password, and press Enter.
C Press Enter when the [Create New Password] display is shown.
D Press Enter when the [Confirm New Password] display is shown.
9 Press .
F10
At the confirmation message, select [Yes] and press Enter.
The computer will restart.
The following procedures are example. It is different according to your environment. Contact your technical sup-
port office.
A Press Ctrl + P when [Press <CTRL - P> to enter Intel(R) ME Setup] is shown after the [Panasonic] boot
screen disappears.
B Enter "admin" in [Intel(R) ME Password], and press Enter.
C Enter the New Password in [Intel(R) ME New Password] to change the password, and press Enter.
At confirmation massage, enter the password, and press Enter.
Write down new password to remember you password.
The password has the limitation (
D Select [Intel(R) ME Configuration], and press Enter.
At the confirmation message, press Y.
E Setup the items if necessary.
Confirm your system administrator about the setup items.
F Select [Return to Previous Menu] after setup is complete.
Follow the on-screen instructions.
The computer will restart.
CAUTION
You can use the following characters to set Intel(R) ME Password.
• Minimum of 8 and maximum of 32 characters are used.
• 1 or more numeric characters are included.
• 1 or more special characters (example: "!" "$") are included (only characters that can be displayed with the US
keyboard).
• Capital letters and small letters are mixed.
28
®
AMT>
F2
Enter
.
Enter
.
Enter
bellow).
or while [Panasonic] boot screen is displayed.
Del
.
.
Enter
®
AMT)
.
Enter