Adjustment; Service Adjustment Menu Operation - Eiki LC-XM2 Service Manual

I Adjustment
I SERVICE ADJUSTMENT MENU OPERATION
I To enter service mode
To enter service mode press the "MENU" and "IMAGE"
buttons on the projector simultaneously and hold for 2
seconds. As shown in a figure, a service mode display
appears on a screen.
I Adjustment
Adjust service data using the following control buttons.
1. "POINT UP" ------- An item number increases.
2. "POINT DOWN" -- An item number decreases.
3. "POINT RIGHT" -- An adjustment value increases.
"VOLUME+"
4. "POINT LEFT" ---- An adjustment value decreases.
"VOLUME - "
I To exit service mode
Press the "POWER on/off" button only once on the projec-
tor or remote control unit to quit the service mode.
I LOCATION OF TEST POINT AND VR
TEST POINTS LOCATION
ASSY PWB MAIN
Normal Mode
Service Mode
"Point Up / Down"
Adjustment item
TP-66A
TP-R1
TP-NRS1 TP-G1
TP-B1
VR5601
-12-
Service Mode
"MENU"
"IMAGE"
Service Mode
Computer
10
"POWER
ON/OFF"
Computer
10 137
"Point Left / Right"
"Volume + / -"
Adjustment deta value
137