Lenovo N500 Supplement For User Manual page 19

N500_Service Flyer.book Page 18 Thursday, September 25, 2008 1:34 PM
Note:
If only one DIMM is used on the computer you are servicing, the card must
be installed in SLOT-0 (
To make sure that the SO-DIMM is installed correctly, do as follows:
1
Turn the computer on.
2
Hold F1 key during startup, and the BIOS Setup Utility screen opens.
The "Total Memory" item shows the total amount of memory installed
in your computer.
18
: lower slot), but not in SLOT-1 (
a
b
: upper slot).
b
a