Panasonic Toughbook CF-27 Series Reference Manual page 8

Security Measures
Setting the Supervisor Password
1
Run the Setup Utility
2
Using and
3
Using and
press Enter
4
<Only when the Supervisor Password has been set>
Enter your password at the [Enter Current Password], then
press Enter
5
Enter your password at the [Enter New Password], then
press Enter
To disable the Supervisor Password
Press only Enter
6
Re-enter your password at the [Confirm New Password] , then
press Enter
To disable the Supervisor Password
Press only Enter
7
At the [Setup Notice], press Enter
8
Press F10 , then select [Yes]
CAUTION
Your password will not be displayed on the screen.
Please limit your password to seven characters. Note that there is no
distinction between upper and lower case letters.
White colored keys can be used. Note that the space bar and function
keys cannot be used.
Do not input your password while holding down on Shift or
Use only the upper horizontal row of numeric keys to input your user
password.
Do not forget your password. If a password is forgotten you will be unable
to use your computer. Please contact Panasonic Technical Support.
When running the Setup Utility, do not leave your computer even for a
short time.
NOTE
When you do not want the User Password enabled, changed, or dis-
abled without permission,
using and
using and
(enabling, changing, disabling)
( page 27)
, select [Security]
, select [Set Supervisor Password], then
, select [User Password Protection] and press Enter
, select [Protected] and press Enter .
8
Ctrl .