Sony RM-B150 Operation Manual page 23

3 Paint control block
a b
AUTO
KNEE
KNEE M GAMMA
a AUTO KNEE button (lights in amber)
The button is specified at the factory to turn on and off
the auto knee function. Press and light up the button to
turn on the auto knee function.
Using the RM Configuration menu, you can change
the function to be turned on/off with this button.
b KNEE control
The control is specified at the factory to adjust the
master knee point.
Using the RM Configuration menu, you can change
the item to be adjusted with this control.
c M GAMMA (master gamma) control
The control is specified at the factory to adjust the
master gamma.
Using the RM Configuration menu, you can change
the item to be adjusted with this control.
d DETAIL control
The control is specified at the factory to adjust the
detail level.
Using the RM Configuration menu, you can change
the item to be adjusted with this control.
Note
The adjustment mode of the above three controls is
specified at the factory as Relative mode, which can be
changed to Absolute mode using the RM
Configuration menu. The center click position of each
control is the reference position in Relative mode. The
adjustment range in Relative mode is also selected
using the menu.
See "Settings on the RM Configuration Menu" on page
9 (E).
c d
DETAIL
4 White balance control block
a
WHITE
R
a WHITE (white balance) controls
Adjust the R/B white balance.
The adjustment mode of these controls is specified at
the factory as Relative mode, which can be changed to
Absolute mode using the RM Configuration menu.
See "Settings on the RM Configuration Menu" on page 9 (E).
b A (memory A) button (lights in amber)
Press and light the button to obtain the white balance
setting stored in memory A of the camera (Memory A
mode).
When this button is lit, a new white balance setting is
stored in memory A each time you change it.
Press the button again to release Memory A mode.
c B (memory B) button (lights in amber)
Press and light the button to obtain the white balance
setting stored in memory B of the camera (Memory B
mode).
When this button is lit, a new white balance setting is
stored in memory B each time you change it.
Press the button again to release Memory B mode.
d AWB (auto white balance) button (lights in red)
Press to automatically adjust the white balance.
The button lights during adjustment and goes dark
when adjustment is completed.
If you press this button when lit, the automatic
adjustment is canceled, and the button flashes. To stop
the flashing, press the button again.
e PRE (preset) button (lights in amber)
Press and light the button to fix the white balance to
3200K (Preset mode).
Press the button again to release Preset mode.
Note
In Preset mode, manual adjustment with the WHITE
controls and automatic adjustment with the AWB
button are both disabled.
When the adjustment mode of the WHITE controls is
specified as Absolute mode, the Memory A, B, and
AWB buttons are disabled.
b c d e
A AWB
B PRE
B
5 (E)