Loading Paper Into Manual Feed Tray - Kyocera FS-1110 Operation Manual

2-14

Loading Paper into Manual Feed Tray

The FS-1110 can load one sheet into the Manual Feed tray.
1
Adjust the position of the paper guides on the MF tray. Standard
paper sizes are marked on the MF tray. For standard paper sizes,
slide the paper guides to the corresponding mark.
2
Align the paper with the paper guides and insert as far as it will go.
When loading envelope, place with the envelope flap closed and
keep the printing side face-up. Insert envelope against the guide
with the flap on the front or left side until they stop.
Correct
Correct
Incorrect
3
Specify the paper size and type for MF tray using Configuration Tool.
For more information, refer to Configuration Tool on page 3-11.
Note If the paper is considerably curled in one direction, for
example, if the paper is already printed on one side, try to roll
the paper in the opposite direction to counteract the curl.
Loading Paper