Cord Storage; To Store Your Accessories; Operation - Husky HV06000 Operator's Manual

SP6688-2 HUSKY-ES.qxd

Cord Storage

Simply, wrap the power cord around the
powerhead (as shown) and snap the
connector on the plug to a wrap of the
cord.
1. Slide extension wands and acces-
sories onto posts of the caster feet for
storage.
2. To remove wands and accessories,
lightly rotate and pull upward.
!
WARNING: To reduce the risk of fire, explosion, or damage to Vac:
• Do not leave Vac running while unattended - you may fail to notice important
signs indicating abnormal operation such as loss of suction, debris/liquid exiting
exhaust, or abnormal motor noises. Immediately stop using Vac if you notice
these signs.
• Do not leave Vac plugged-in when not in use.
• Do not continue running when float has cut off suction.
• Do not operate Vac in areas with flammable gases, vapors or explosive dust in
the air. Sparks inside the motor can ignite airborne flammables. Flammable gases
and vapors include: lighter fluid, solvent-type cleaners, oil-based paints, gasoline,
alcohol, or aerosol sprays. Flammable dusts include: coal, magnesium,
aluminum, grain, or gun powder.
• Do not vacuum up explosive dusts, flammable liquids, or hot ashes.
• Do not use Vac as a sprayer.
7/24/08 9:02 AM

To Store Your Accessories

Operation

Page 7
Cord Wrap
Storage
Power Cord
Extension
Wand (2)
Utility
Nozzle
Caster Feet Storage
7