Advertisement
RED WIRE
.
ORANGE WIRE
BLACK WIRE
WHITE WIRE
BLUE WIRE
EXAMPLE OF A HALL EFFECT SPEED SENSOR (p/n 412.009)
BLACK WIRE = ignition (+12V)
Fit a 3300 Ohms ¼ W
Resistor between Black
and Blue wires.
BLUE WIRE = Signal
BROWN WIRE = Earth
Page 3
WIRING DIAGRAM
Battery Positive (+12V)
Ignition Positive (+12V)
Battery Negative (Earth)
Illumination Positive. This wire must be
connected for headlight monitoring. If this
function is not required, connect wire to
earth.
Speed Signal. (Hall Effect or Inductive.)
WIRING OF SPEED SENSORS
connect last
Mechanical
Speedo Cable
Advertisement
