Related Manuals for VDO roadlog
Summary of Contents for VDO roadlog
- Page 1 VDO RoadLog ™ Quick Start Instructions V.2.0 Includes ROADSIDE INSPECTION instructions.
-
Page 2: Driver Overview
Change HOS rule Set Powering Up the RoadLog – Note: RoadLog ELD wake-up is automatic when the key in the ignition is turned to ON; RoadLog ELD goes to sleep when the ignition is OFF for at least 6 minutes. -
Page 3: Quick Start Instructions
RoadLog as shown to the right. Follow the prompts on the screen. In order to log in to the RoadLog with Username and Password, tap “Driver Login” on the screen. The Authentication screen will show up. Enter your username and password via keyboard. - Page 4 This screen allows you to see whether you have hours available before you log in. If you have hours available, select continue – otherwise you will have to wait until your daily or weekly reset is accomplished. DVIR Pre-trip and Post-trip Inspection You will be asked to perform the vehicle pre-trip and post-trip inspection on...
- Page 5 Driver Logs from the back office. UDA Unassigned Driving Account If the vehicle is driven without any driver logged in, RoadLog will still track the periods driven in order to assign this period to a driver later. During your...
- Page 6 “Off Duty” to “Driving.” If the driver is done for the day, it is highly recommended that they log out of the RoadLog completely, to avoid someone else (e.g. another driver or mechanic) tripping the “Off Duty” time into “On Duty”...
-
Page 7: Location Indication
Duty Status Change Alert If the user remains in “Driving,” RoadLog will prompt the driver to change duty status. Location Indication Note: The vehicle location at duty status change is captured automatically by GPS, accurate to within 3 yards. RoadLog associates this GPS location with the closest large population location based on Census Data. - Page 8 Adding/removing Trailer Current Trailers screen Submit DVIR When adding / removing trailers, RoadLog will automatically prompt the user to perform a DVIR. Adding/Removing Shipping Documents Current Shipping Document screen...
- Page 9 View Logs / DVIR / Print Edit / Modify Logs In order to annotate or edit your log, tap on the graph grid. You will be able to add annotations for any duty status or edit / add new duty records.
- Page 10 Driver’s logs certification is required. Tap the “Certify” button to complete the 24 hours certification process RoadLog will automatically prompt the driver to certify logs during the login and logout process. If the user is not ready to certify they can skip this step.
- Page 11 Insert Comment screen Sample RoadLog ELD Daily Log Printout To review the daily log on the RoadLog screen, go to “View Logs/DVIR” screen and tap on the daily graph grid. The list of events is displayed.
- Page 12 “Inspection / More” screen then to “Settings” and “Diagnostic” and then “Diagnostic Events.” The following malfunctions may be recorded by RoadLog ELD: ECMFail Engine Synchronization Compliance Malfunction TimeFail Timing compliance malfunction PositionFail...
- Page 13 Log Out Drivers can log out using the Driver Key or by logging out manually. ELD Certificate...
- Page 14 Commercial Vehicles & Aftermarket 6755 Snowdrift Road, Allentown, PA 18106 USA www.vdoroadlog.com E-mail: roadlog-sales@vdo.com For more information and to become a VDO RoadLog distributor or retailer call: (855) ROADLOG or (855) 762-3564 or 610-366-8489 For installation and service questions contact: VDO Technical Support: Tel: (800)-265-1818, or (610) 289-1390 E-mail: roadlog-support@vdo.com...
Need help?
Do you have a question about the roadlog and is the answer not in the manual?
Questions and answers