Restoring The Factory Contents By Using Recovery Disc Set - Lenovo ThinkPad X301 Hardware Maintenance Manual

8. When the recovery process is complete, the Welcome to Microsoft Windows

Restoring the factory contents by using Recovery Disc Set

When the hard disk drive (HDD) or solid state drive (SSD) is replaced because of a
failure, no product recovery program is on the new drive. In this case, you must
use the Recovery Disc Set for the computer. Order the Recovery Disc Set and the
drive at the same time so that you can recover the new drive with the pre-installed
software when they arrive. For information on which discs to order, see "Recovery
discs" on page 155.
The recovery disc set consists of the user instructions and the following set of
DVDs to restore the computer to the original factory configuration.
Operating System Recovery Disc (one disc)
Applications and Drivers Recovery Disc (one or more discs)
Supplemental Recovery Disc
Notes:
v You must have a DVD drive to use the recovery discs. If you do not have an
v During the recovery process, all data on the drive will be deleted. If possible,
To restore the computer to the original factory configuration using the recovery
disc set, do the following:
56
ThinkPad X301 Hardware Maintenance Manual
screen is displayed. Follow the instructions on the screen to complete the
Windows setup.
This disc restores the Microsoft
to start the recovery process.
This disc restores the preinstalled applications and drivers on the
computer.
This disc contains additional content, such as updates to the software that
was preinstalled on the computer. Not all recovery disc sets come with a
Supplemental Recovery Disc.
internal DVD drive, you can use an external USB DVD drive.
copy any important data or personal files that you want to keep onto removable
media or a network drive before you start the recovery process.
Note: Recovery takes several hours. The length of time depends on the method
you use. If you use recovery discs, recovery takes at least five hours.
1. Make the CD/DVD drive the first startup device in the startup sequence
using the following procedure:
a. Press and hold down the F1 key, and then turn on the computer. When the
logo screen is displayed or if you hear repeating beeps, release the F1 key.
The Setup Utility program opens.
b. Use the arrow keys to select Startup → Boot.
c. Select the CD/DVD drive as the 1st Boot Device.
2. Insert the Operating System Recovery Disc into the DVD drive.
3. Press F10 to save the Setup Utility configuration changes. Follow the
instructions on the screen to begin the recovery process.
4. Select your language and click Next.
®
Windows operating system. Use this disc