Lenovo 40Y7443 User Manual page 21

Note: This section must be completed before continuing with the Windows 2000
automatic image setup.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to boot into
Windows 2000.
4. Open the Display Properties window by clicking Start →Control Panel, and
then double-clicking the Display icon.
5. Click the Settings tab.
6. Click the Advanced button.
7. Click the Monitor tab.
8. Click the Properties button.
9. Click the Driver tab.
10. Open the Upgrade Device Driver Wizard window by clicking on Update Driver ,
the user has to select
11. Select Display a list of the known drivers for this device so that I can
choose a specific driver, and then click Next.
12. Insert the Setup CD into the CD drive, then click the Have Disk button.
13. Click OK.
14. Ensure that the CD drive letter is selected.
15. Choose L192 Wide
from the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the system. The system will automatically select the maximum refresh
rate and corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve
display quality. Lenovo recommends using
Hz, or 640 x 480 at a refresh rate of 60 Hz.
Getting further help
If you still can't solve your problem, please contact the Customer Support Center.
For more information on contacting the Customer Support Center, please see
Appendix A, "Service and Support," on page A-1.
an option BEFORE they can click
ide
Monitor and click OK. The files will be copied.
either 1440 x 900
and then click Next.
Next
at a refresh rate of 60
Chapter 3. Reference information
3-5