Selecting A Supported Display Mode - Lenovo 40Y7443 User Manual

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer
to your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and
the image controls.
Unlike cathode - ray
flicker,
Note: If your system has previously been used with a CRT monitor and is
currently configured to a display mode outside the range of this monitor, you may
need to re-attach the CRT monitor temporarily until you have re-configured the
system; preferably to
(NRD) mode.
Table 2-2. OSD functions (continued)
OSD Icon on Main Menu
Options
tube (CRT)
liquid crystal display
1440 x 900 @ 60 H z, w
Submenu
Menu Position
Default
Custom
Factory Reset
Accessibility
monitors, which require a high refresh rate to minimize
(LCD) or Flat Panel technology is inherently flicker-free.
hich is the Native Resolution Display
Chapter 2. Adjusting and using your monitor
Description
Menu position adjusts menu
location on the screen.
Default returns the menu
position to the default settings.
v Horizontal: Changes the
horizontal position of the OSD.
v Vertical: Changes the vertical
position of the OSD.
v Save
v Cancel
v Reset
Resets monitor to the original
factory settings.
Controls button and menu
settings for accessibility
preferences.
Button repeat rate:
Select or to change.
v Off
v Default
v Slow
Menu time out: Sets the
length of time the OSD will
remain active after the last time a
button is pressed.
2-5