Carer-Operated Angle Adjustment - Invacare REA Clematis User Manual

CARER-OPERATED ANGLE ADJUSTMENT

The wheelchair is equipped with carer-operated controls. You can adjust the angle of the backrest forwards
or backwards and tilt the whole seat unit including the backrest. These two functions can either be controlled
manually or electrically.
1.
A
2.
B
3.
4.
®
CLEMATIS
Seat unit
C
D
1. Backrest angle adjustment
Adjust the angle of the backrest by pulling the
yellow left-hand lever (A) upwards and keeping
it there whilst you push the backrest away from
you or pull it towards you until you have obtained
the required position. Release the lever (A).
2. Tilt adjustment
Tilt of the seat unit (seat and backrest) by pull-
ing the green right-hand lever (B) upwards and
keeping it there whilst you tilt the seat unit to the
required position. Release the lever (B).
Be careful that you do not trap your finger
between the seat and the armrest attachment
(picture 3).
4.Tilt lock
The tilt lock (C) allows you to set the tilting of
the seat unit and/or the angling of the backrest
to a fixed position. Tilt and/or angle the seat and
backrest to the desired position and insert the
tilt lock. The position is now set and cannot be
changed.
The tilt lock is removed by pressing the plastic peg
& YKVJ C UOCNN QDLGEV YJKNG RWNNKPI QWV VJG VKNV
lock.
15