Invacare REA Clematis User Manual page 11

3a.
3b.
4.
C
A
D
®
CLEMATIS
B
E
3a. Legrests
Attach the legrests by pushing the tube at the
upper part of the legrests down into the tubes
on the wheelchair. You must angle the legrests
outwards when inserting them.
3b.
Lock the legrests by turning them inwards. The
legrests are automatically locked so there is no
risk of them coming off the wheelchair.
Be careful not to trap your fingers between
frame and legrest.
4. Neckrest
You attach the neckrest by putting it into the
reciver on the backrest and fasten it with the
knob (B).
Adjust the position with the lever (A) and nuts
(C). Adjust the height by loosening the knob (B).
Part (E) is a memory function for the height of the
neckrest. When the desired height is achieved,
loosen the screw on the memory and lower it
towards the back. Fasten the screw again.
Pay attention to how far the neckrest is raised.
+H VJG TGF OCTMKPI & KU XKUKDNG VJG PGEMTGUV
is raised too high.
11