Table of Contents
Advertisement
Solving the
You can pair up to ten devices with the Parrot MINIKIT Neo. If you attempt to pair
memory full
an eleventh phone, the kit says «memory full». You must then clear the memory
problem
by holding down both the red and green buttons for 3 seconds. Doing so also
clears all the contacts.
Using the Parrot MINIKIT Neo with 2 phones
Dual mode allows you to simultaneously connect two phones to the Parrot MINIKIT Neo.
Activating dual mode
To activate dual mode :
Connecting 2 phones
When the Parrot MINIKIT Neo is switched on, it attempts to connect to all
to the Parrot MINIKIT
paired phones in the vehicle. If there are more than two paired phones in the
Neo
vehicle, the device connects to the two phones with the oldest pairing.
Main and secondary
phones
Making and receiving
calls
Parrot MINIKIT Neo – User guide
Note :
Depending on the model of your phone, you may have to authorize
the connection to the Parrot MINIKIT Neo to allow the automatic
connection. Refer to your phone user guide for more information.
1. Select
Dual
2. Press the jogwheel.
> The Parrot MINIKIT Neo confirms the dual mode new
status.
Note:
Dual mode is deactivated by default.
When two phones are connected to the Parrot MINIKIT Neo, one of
them becomes the main phone and the other is the secondary phone.
By default, the main phone is the one with the oldest pairing to the
Parrot MINIKIT Neo.
You can receive calls (manually or through voice recognition) from
the main or secondary phones. The Parrot MINIKIT Neo ringtone
varies according to the phone receiving the call.
Only the phonebook of your main phone may be accessed through
the Parrot MINIKIT Neo. You can only make calls using your main
phone. However you can easily switch between the connected
phones by holding down the jogwheel for two seconds.
If you receive a call on one of the phones while you are already on a
mode.
Advertisement
Table of Contents
