7-1-3. When Control Key does not operate
does LED turn on red light?
Does LED turn on green ligh t?
Is output first pin PW7 no rmal?
A. First check connection, and then check the output of first pin of PW6(ST-BY 3.3V).
B. Check waveform third pin and 5th pin of PW6. If waveform does not appear, replace
Connector or KEY PCB
- Main TP
RCW9(KEY1), RCW10(KEY2)
Check S tart
After turn on the powe r,
Y
After ST-BY on
Y
Y
Check Main PCB
N
1.
Check AC co nnect ion
2.
Check Powe r S/ W ON
3.
Check ot her PCBs
N
Check the connection o f KEY PCB
to MAIN PCB
-> Check the connection between
KEY PCB and MAIN PCB
N
1.
Replace the CON NECTOR
2.
Replace KEY PCB
-39-