Imagine Nexio AMP NX3601 HDX Hardware Installation And User's Manual page 32

32
Chapter 3
Getting Started
4 Name the deployment (.dc) file using the server name and the serial number (found on the right
hand side of the server).
5 Insert and locate your USB stick, and click Save.
6 Click OK.
7 Email the .dc file and the description of what you are registering (e.g., 4 Channels SD/HD) to Harris
BCD Support at
8 Copy the .rc file to the USB stick and insert it into server.
9 Open the Software License Key - Registration Manager as described above.
10 In the Open dialog box, locate the USB stick and double-click the .rc file.
11 Run the appropriate application to complete the registration (e.g., NEXIO Config, PlayList, etc.)
Make sure to scan your USB stick before inserting it into the computer and again
before inserting it into the server to prevent viruses or malware.
The following message appears telling you that the .dc file is generated.
Figure 3-6 Information Dialog Box
bcdservice@harris.com.
Harris BCD Support will send you a redistribution code (.rc) file.
The Software License Key - Registration Manager shows the application as registered
(see Figure 3-7).
Figure 3-7 NEXIO Config Registered
You can now close the Software License Key - Registration Manager and start NEXIO
Config as described above.