Configuration 2: Connecting The Drive Using Standard Usb Bus Power - Lenovo 41N5631 User Manual

To connect the Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe) to your system using self
power with AC adapter, do the following:
Figure 1-1. Configuration 1: self power (AC adapter) configuration
1. Turn on your computer.
2. Connect the AC adapter to the DC IN connector 1 on the USB 2.0 Super Multi-Burner Drive.
3. Using the USB cable, insert the cable plug 2 into the USB connector
4. Plug the standard USB connector 3 into the USB port of your computer.
5. Plug the power supply 4 into an outlet.

Configuration 2: Connecting the drive using standard USB bus power

Requirements
v One standard USB cable (shipped with this option).
v One USB port (available on your system).
Specifications
Read and write of CD and DVD media are supported.
Note: Read and Write speeds are the same as with the AC adapter.
Read speeds for Configuration 2
Media
DVD-ROM (Single layer)
DVD-ROM (Dual layer)
DVD-R (4.7 GB)
DVD-R DL
DVD-RW (4.7 GB)
DVD-video
DVD-RAM (2.6 GB)
DVD-RAM (4.7/9.4 GB)
DVD+R
DVD+R DL
DVD+RW (4.7 GB)
CD-ROM
CD-R
Max speed with USB Standard Bus
Power
8x
6x
8x
4x
8x
4x
2x
5x
8x
4x
6x
24x
24x
Chapter 1. Lenovo USB 2.0 Super Multi-Burner Drive (With LightScribe)
of the drive.
Disc spin method
CAV
CAV
CAV
CAV
CAV
CAV
ZCLV
PCLV
CAV
CAV
CAV
CAV
CAV
1-7