Configuration 2: Connecting The Drive Using Standard Usb Bus Power (Limited Speed Operation); Standard Usb Bus Power (Limited Speed Operation) - Lenovo 40Y8699 User Manual

To connect the USB 2.0 Super Multi-Burner Drive to your system using self power with AC adapters, do
the following:
Figure 1-1. Configuration 1: self power (AC adapter) configuration
Note: The illustration on the left applies to US/Canada/Latin America/Japan.
Note: The illustration on the right applies to all other countries.
1. Turn on your computer.
2. Using the USB cable, insert the cable plug 2 into the USB connector
power supply 4 into an outlet.
3. Connect the AC adapter to the DC IN connector 1 on the USB 2.0 Super Multi-Burner Drive.
4. Plug the standard USB connector 3 into the USB port of your computer.
Configuration 2: Connecting the drive using standard USB bus power
(Limited Speed Operation)
Requirements
v Two Standard USB cables (shipped with this option).
v Two free USB ports available on your system.
Specifications
Read and write of CD and DVD media are supported.
Read speeds for Configuration 2
Media
DVD-ROM (Single layer)
DVD-R (4.7 GB)
DVD+R
CD-ROM
CD-R
CD-RW
CD-DA (DAE)
Max speed with USB Standard Bus Power
4x CAV
4x
4x
10x
10x
10x
10x CAV
Chapter 1. USB 2.0 Super Multi-Burner Drive
of the drive. Plug the
1-7